Perft for Checkers for Depth 28

-
My quest for deeper perft numbers for 8x8 checkers using has reached depth 28. Below you see the perft(28) breakdown per move, called "divide". As stated before, the numbers were computed on a cluster of machines, optimized with a "hard collision"-free transposition table as well as bulk counting. The move generator does not eliminate duplicate captures.

At this point, the limits of 64-bit unsigned integers have been reached. Although there are obvious ways around these restrictions, this seems a very good time to give this (by now probably insane) project a rest. I have updated this OEIS entry up to depth 26, and may add the higher depths also when I am a bit more comfortable with these most recent results.

divide(28)
12-16 = 2400708339858199191
11-16 = 2431386196712611878
11-15 = 2231787529331259810
10-15 = 2186446356811761737
10-14 = 1872427919495823777
 9-14 = 2285893686261887442
 9-13 = 2969067990365356900
 --------------------------
perft(28) = 16377718018836900735




Comments

Aart Bik said…
A second run with slightly different parameters confirmed the numbers.
September 27, 2012 at 9:29 AM
Post a Comment

Popular posts from this blog

Checkers Move Generation

-
I was able to make a small improvement in the checkers move generator (written in Java for the Android SDK). The following table shows run times of several perft depths before and after optimization when run on the emulator (which should mimic actual run times on the phone quite well). DEPTH #LEAF NODES ORIGINAL OPTIMIZED TIME TIME ==================================== 7 179740 2.9s 1.9s 8 845931 14.2s 9.7s 9 3963680 66.3s 45.6s 10 18391564 294.6s 208.7s P.S. Runtimes for a C++ checkers move generator on a 2.2 GHz Core 2 Duo are given at my checkers page .
Read more

Connecting Chess for Android to a Remote Server

-
Image
I have received several questions on how to connect Chess for Android running on an Android device (e.g. a phone) as client to a remote chess server (e.g. a powerful desktop), so I decided to write a small document with detailed instructions. What you will need: The server software from Bernhard Wallner's chess utilities , suited for your server's operating system (if, say, your desktop runs Windows, you will need to download the Windows version). You do not need to download the client software in this case. The network enabled version of Chess for Android . On the server, start the engine server software, and construct a new row for every engine you want to run remotely. Assign a name, port number, and select the full path to each engine binary (an executable that runs on the server). You can also supply command line options for starting the engine. Check the active checkboxes and click start when done. This yields something similar to the screenshots below. Here, I have s...
Read more

Connecting with the DGT Board

-
Image
After all the fun I had connecting Chess for Android with the Millennium  over Bluetooth, I was curious if I could provide similar support for the DGT electronic chess boards. Some of these have Bluetooth capabilities, most use USB connections, and some older models, like the one I have, still use the RS-232 connector. To my pleasant surprise, by combining the original serial cable of DGT with a USB-to-serial cable and a female-USB-to-USB-C cable, I was able to get an actually working connection between my DGT board and my tablet or phone. Next was implementing support in Chess for Android. Luckily, DGT kindly shared the protocol documentation with me, and after a fun weekend of hacking, Chess for Android now proudly supports DGT electronic chess boards as well.
Read more