Perft for Checkers for Depth 27

-
With the new improvements in place, it would almost be a waste not to go deeper with my perft for checkers computation. Therefore, I computed perft(27) from the initial position of 8x8 checkers. Below you see the perft breakdown per move, called "divide". As stated before, these numbers were computed on a cluster of machines, further optimized with a "hard collision"-free transposition table as well as bulk counting. The move generator does not eliminate duplicate captures.

 move                 divide(27)
-------------------------------
 12-16    =  516399283859880203
 11-16    =  519502096014967805
 11-15    =  476666239516455180
 10-15    =  468705060101275533
 10-14    =  400425747281243848
  9-14    =  486493422418651579
   9-13    =  631652334435528457 
-------------------------------
perft(27) = 3499844183628002605

The implementation is "fault tolerant" against machine failures. Nevertheless, since I saw a few of these recoveries in this particular run, I may rerun this depth soon to verify the results pedantically.

Comments

Aart Bik said…
A second run luckily confirmed the numbers.
September 20, 2012 at 8:22 PM
Aart Bik said…
Paul Byrne kindly confirmed my perft(27) as well. Thanks!
September 26, 2012 at 10:30 AM
Post a Comment

Popular posts from this blog

Checkers Move Generation

-
I was able to make a small improvement in the checkers move generator (written in Java for the Android SDK). The following table shows run times of several perft depths before and after optimization when run on the emulator (which should mimic actual run times on the phone quite well). DEPTH #LEAF NODES ORIGINAL OPTIMIZED TIME TIME ==================================== 7 179740 2.9s 1.9s 8 845931 14.2s 9.7s 9 3963680 66.3s 45.6s 10 18391564 294.6s 208.7s P.S. Runtimes for a C++ checkers move generator on a 2.2 GHz Core 2 Duo are given at my checkers page .
Read more

Connecting Chess for Android to a Remote Server

-
Image
I have received several questions on how to connect Chess for Android running on an Android device (e.g. a phone) as client to a remote chess server (e.g. a powerful desktop), so I decided to write a small document with detailed instructions. What you will need: The server software from Bernhard Wallner's chess utilities , suited for your server's operating system (if, say, your desktop runs Windows, you will need to download the Windows version). You do not need to download the client software in this case. The network enabled version of Chess for Android . On the server, start the engine server software, and construct a new row for every engine you want to run remotely. Assign a name, port number, and select the full path to each engine binary (an executable that runs on the server). You can also supply command line options for starting the engine. Check the active checkboxes and click start when done. This yields something similar to the screenshots below. Here, I have s...
Read more

Connecting with the DGT Board

-
Image
After all the fun I had connecting Chess for Android with the Millennium  over Bluetooth, I was curious if I could provide similar support for the DGT electronic chess boards. Some of these have Bluetooth capabilities, most use USB connections, and some older models, like the one I have, still use the RS-232 connector. To my pleasant surprise, by combining the original serial cable of DGT with a USB-to-serial cable and a female-USB-to-USB-C cable, I was able to get an actually working connection between my DGT board and my tablet or phone. Next was implementing support in Chess for Android. Luckily, DGT kindly shared the protocol documentation with me, and after a fun weekend of hacking, Chess for Android now proudly supports DGT electronic chess boards as well.
Read more